International Research Journal of Education and Technology

Any building structure used by the industry to store raw materials or for manufacturing products of the industry is called an industrial building. Industrial buildings can be classified as Normal type industrial buildings and Special type industrial buildings. Normal types of industrial building are shed type buildings with simple roof structures on open frames. Such buildings are used as workshops, warehouses etc. These buildings require large and clear areas unobstructed by the columns. The large floor area provides sufficient flexibility and facility for later change in the production layout without major building alterations. The industrial buildings are constructed with adequate headroom for the use of an overhead traveling crane. Special types of industrial buildings are steel mill buildings used for manufacture of heavy machines, production of power, shopping malls etc. The function of the industrial building dictates the degree of sophistication

Multi storied Industrial/commercial building is selected and is well analyzed and designed.    It is a Ground+2 storied building, located at Hyderabad. The analysis and designing was done according to the standard specification to the possible extend. The analysis of structure was done using the software package E-tabs. All the structural components were designed manually. Detailing of reinforcement was carried in AutoCAD 2022. The software saves time involved, taking a safer side rather than the manual work. KEYWORDS:

• E-tabs (Extended Three-Dimensional Analysis of Building System)

• Load Combinations

• IS 456 -Plain and Reinforced Concrete

• IS 875 (Part-1) –Deal Load

• IS 875 (Part-1) –Live Load

• IS 875 (Part-1) –Wind Load

 • IS 1893(Part-1) – General Provisions and Buildings